McLanahan delivers mineral processing equipment to Mexico

Designed to feed and crush petroleum coke from 450mm x 450mm to 100mm nominal with a throughput capacity of 1150 MTPH.

When a new refinery needed mineral processing equipment the owners returned to their preferred supplier, McLanahan and its custom-engineered equipment. The site is in a highly corrosive environment, and the equipment supplied had to meet the demands of the hazardous location.

The customer, a large engineering and construction firm, required crushing and feeding equipment for a new refinery in the southeast region of Mexico.

The refinery features a delayed coking unit, which is designed to convert residue from the distillation plant into higher-value products.

After successfully working with McLanahan for the supply of mineral processing equipment on a previous refinery, they again contacted McLanahan for their new project.

 

Site hazards and project requirements

The site is in a highly corrosive environment, and the equipment supplied had to meet the demands of the hazardous location.

As the coking unit is situated in an electrically hazardous and high dust prone area, site-specific conditions had to be met, this included the condition that all supplied electrical equipment had to be explosion-proof.

The customer specifically wanted a feeder-breaker for the plant due to their previous experience with this type of equipment.

The feeder-breaker would receive pet coke from clamshell bucket cranes, via a hopper. The material would then be crushed by the breaker head, and this crushed material fed onto an elevated feeder conveyor.

The hopper was designed based on the customer’s specifications to efficiently receive product from the cranes and to reduce the environmental impacts of the equipment on site.

 

Engineering delivers a customised solution

After contacting the McLanahan office in Chile, the McLanahan teams worked together to provide the best solution for the customer.

The Australian engineering team conducted various design risk reviews and finite element assessments to ensure all stress loads complied with the required engineering standards.

The Australian, American, and Chilean sales and engineering teams successfully collaborated to provide the customer with two custom McLanahan feeder-breakers.

They are designed to feed and crush petroleum coke from an in-feed lump size of 450mm x 450mm to 100mm nominal, with a maximum throughput capacity of 1150 metric tonnes per hour each.

Plant layout with bucket cranes feeding into hopper and feeder-breaker
FB-36-72-45 with hopper

 

 

Each feeder-breaker features:

  • A single drag chain conveyor
  • A breaker roll consisting of replaceable, carbide-tipped picks retained in replaceable pick holders
  • A custom frame with sloping sides and end panel to maximise dump hopper volume and minimise hopper height
  • A redesigned longer discharge section than a traditional Feeder-Breaker
  • Head and tail shaft removable assemblies. This enable the assemblies to be removed from the machine without moving the chute work
  • Innerwear elements are designed as standard and relocatable to minimise parts
  • An electromechanical drive system as requested by the client
  • A semi-automatic chain tensioning system, and
  • A feed hopper with liners with a top opening of 7.62m x 7.62m and includes a 20-degree inclined grizzly with 460mm square openings.

 

The feeder-breaker FB-36-72-45 is 15.7m in length and the feed hopper is 9.8m long that sits 9.84m above the feeder-breaker.

The feeder-breaker was designed with a longer discharge section as the customer required additional access to allow for maintenance, removal and replacement of the tail end pulleys on the conveyor.

The hoppers feature an innovative design allowing them to be shipped as flat packs and bolted together on site, thereby eliminating the requirement for site hot works.

This was important due to the highly hazardous site location. The hopper has a capacity of approximately 30m3 in a trapezoidal layout with no angle being less than 55 degrees.

FB-36-72-45 3D render with hopper
Breaker roll with carbide tipped picks

 

 

Tailored project management

Both feeder-breakers were manufactured in Australia using local suppliers and contractors. Assembly and factoring acceptance testing (FAT) was completed at its Newcastle facility.

Additional monitoring and testing were required during the manufacturing process due to the protective specifications required by the customer due to the corrosive and hazardous site location.

With customers located around the world, McLanahan successfully manages and accommodates their needs through virtual and traditional means.

The FAT included a live stream for the customer and their representatives to view, and numerous videos and photographs were included in the reporting and updated as they received throughout the project.

The equipment was then partially disassembled for breakbulk freight to Mexico. Due to the stringent site requirements, the customer requested additional packaging protection to prevent moisture build-up during the delivery process.

To prevent damage during delivery, the conveyor drives and breakers were removed and containerised with additional smaller components.

The feeder-breakers will be stored onsite by the customer before installation at the end of 2022.

To keep up to date with Australian Mining, subscribe to our free email newsletters delivered straight to your inbox. Click here.